BA_PH_690-100_EN_10-22.docx
39
11
Commissioning
Please observe the accident prevention regulations!
Before switching on, check that
•
there are no loose parts on the tabletop and that all tools have been removed,
•
the riving knife is correctly adjusted and the sawdust flap is closed,
•
the slide table is in working position,
•
the saw blade guard is properly fitted,
•
the V-belt is properly tightened,
•
the extraction system is connected and in working order,
•
the correct speed is displayed,
•
no persons are in a danger zone of the machine.
11.1
Control Elements
The following controls are available on the control panel of the 690|100 sliding table saw:
Figure 28: Control elements
No. Description
No.
Description
1
Emergency Stop
5
Saw blade angle adjustment (up to 46°)
2
Switch on main saw (lights up when "ON")
6
Indicator height / angle / speed
3
Switch off main saw
7
Preparation switch scoring saw (option)
4
Saw blade height adjustment
11.2
Switching ON
•
Turn the main switch (right on the control cabinet) to position “
I
”.
•
Press the push-button "Switch on main saw" (
2
) and wait until full speed is reached.
•
Start cutting operation.
11.3
Switching OFF
•
To switch off, press push-button (
3
)
→
The machine is slowed down.
•
Turn the main switch (right on the control cabinet) to
position “
0
”
.
1
2
3
4
5
6
7
