BA_PH_690-100_EN_10-22.docx
46
13.6
Date and Time (from software version 1.9)
From software version 1.9, the touch display also has a date and time function.
Figure 42: Set date and time
Show date and time:
•
Tap on the HOKUBEMA logo
→
The current time is displayed
•
Tap on the time displayed
→
The current date is displayed
•
Tap on the date displayed to return
to the logo
Set date and time:
•
Tap the logo for at least 3 seconds
→
The setting menu opens.
•
Set the date and time via the
keyboard and confirm with “
Set
”
.
14
Speed Setting
The speed is adjusted by manually shifting the V-belt.
Switch off the machine before setting the speed (belt change) and secure the main switch
with a padlock against unauthorised start-up during the setting process!
Figure 43: Speed setting - loosen V-belt
•
Tilt the sawing unit to 15 degrees position.
•
Turn the main switch to position “
0
”
.
•
Open the rear maintenance door.
•
Swivel the adjusting lever (
H
) to the right
→
The V-belt is loosened.
•
Now shift the V-belt to the desired speed according
to
Rule of thumb
: Always change from
“large” to “small” first.
•
When shifting, always ensure that the V-belt is again correctly
positioned between the speed fork. Otherwise no correct speed
indication can be given.
•
Swivel the adjusting lever (
H
) to the left
→
The belt is tightened again.
The speed is sensed by means of a fork light barrier!
Figure 44: Speed scheme
H
Motor
5000 rpm
6000 rpm
3000 rpm
4000 rpm
Sawing unit
