BA_PH_690-100_EN_10-22.docx
15
4.1.3
Residual Risks
The machine is built according to the latest state of the art and the recognised safety rules. Nevertheless, the
use of the machine may cause danger to life and limb of the user or third parties or damage to the machine and
other equipment.
Due to the construction of the machine, the following residual risks can occur even when used as intended and
despite compliance with all relevant safety regulations:
Reading and applying the operating manual is mandatory for the operating personnel.
Be alert to possible crushing hazards:
a) when transporting the machine by forklift truck
→
between forks & pallet / machine
b) when picking up the machine
→
between machine / pallet and floor
c) when lowering the machine
→
between machine and fixed equipment
Be alert to possible crushing hazards when lowering the machine (from the cargo pallet to the
floor) with a forklift truck or overhead crane.
Make sure that no objects fall from the forklift truck / crane.
Do not leave any objects / tools on the machine.
It is strictly prohibited to ride on the machine during a lifting operation (with the indoor crane or
forklift). There is a danger of falling!
Unauthorised persons are not allowed to enter the installation area of the machine
(responsibility of the operator).
Be aware of the danger of cutting at the saw blade. Never reach into the running saw blade!
Always wear protective gloves when changing a saw blade.
The saw blade guard must be used resp. moved over the saw blade during every cutting oper-
ation. Cutting without using the saw blade guard is strictly prohibited. The wearing of protec-
tive goggles is mandatory.
Be aware of the danger from falling objects such as workpieces, tools or similar. Therefore, wear
safety shoes, especially when transporting and setting down the machine.
Be aware of the risk of injury from flying tool parts in the event of tool breakage.
Therefore wear protective goggles.
Be aware of the risk of injury from flying workpiece parts and chips, splinters and dust coming out
of the machine. Therefore wear protective goggles.
Be aware of the increased noise emission and wear hearing protection.
Be aware of the increased dust generation. Use the extraction device and wear a dust mask if
necessary.
Be aware of a possible danger of being drawn in by moving machine parts or tools. This can cause
pieces of clothing or hair to be caught. Always wear tight-fitting clothing or avoid loose clothing
and wear a hair net if necessary.
Danger of being drawn in and increased risk of injury when wearing watches and jewellery.
Wearing watches and jewellery is prohibited on the tilting spindle moulder.
Never reach into the area between the saw blade guard and the aluminium profile rail (cross-
cut fence). There is a danger of crushing!
Electrical equipment must be maintained and cleaned regularly.
The saw blade guard for mitre cutting (inclined saw blade) is wider and can therefore be
reached earlier by the profile rail. Therefore the danger of splintering exists earlier.
Danger from electric shock! It is strictly forbidden to bypass safety devices (e.g. safety switches).
Danger from electric shock! There are hazards when working on the electrical system.
This work must only be carried out by qualified personnel!
Be aware of the crushing hazard when closing the saw blade guard and the cutting hazard at the
saw blade.
