BA_PH_245-10_EN_13-22.docx
9
3
General
The PANHANS type 245|10 is a universal tilting spindle moulder with height and tilt adjustable milling arbor, two
directions of rotation, quick tool change device, adjustable speed as well as separately adjustable total and partial
fence.
•
The milling spindle is driven by a three-phase motor.
•
The four speeds (3000 / 4500 / 6000 / 9000 rpm) can be adjusted by flipping the pulley via the belt quick
tensioning device.
•
The milling spindle, which can be tilted in the range from -5° to +45.5°, is mounted in a dust-tight manner.
Special ball bearings and careful alignment of all moving parts give the machine smooth running.
•
The milling arbor is designed for clockwise and anti-clockwise rotation and is secured against rotation. It
has a quick-change tool device, which means that the milling spindle does not have to be locked.
•
The height and tilt adjustment is carried out manually via the two handwheels on the front side.
•
The standard version has a type 215 fence incl. multiplex fence plates. The total fence is adjusted via the
built-in handwheel (separate measuring device, e.g. setting gauge or similar, required). The partial fence is
adjusted by means of a vernier scale. The optional fence type 216 has an LCD display on the handwheel to
indicate the total fence position.
•
The finely planed cast iron machine table has the dimensions 1100 x 760 mm and is provided with a rigid
frame support. Extendable frame supports as well as a turntable are optionally available.
•
Also optionally available is a larger table top with the dimensions 1340 x 800 mm.
This larger version is available with or without a matching turntable.
•
For both table sizes, single-sided and double-sided table extensions are available as accessories.
•
The control panel on the front of the machine contains an ON/OFF switch and a rotation direction switch
for the spindle, a signal lamp for the operating mode "climb milling", indication of the currently set speed
via signal lamp as well as an emergency stop push button.
•
The machine is equipped with a mechanical motor brake which ensures safe braking of the spindle even in
the event of a power failure.
•
The star-delta start-up of the drive motor takes place automatically via contactor control.
•
A machine socket (e.g. for connecting a feeding unit) is fitted in the rear right-hand side of the machine.
•
The lockable main switch is mounted on the machine stand.
•
CE-compliant and GS-tested design.
