BA_PH_245-10_EN_13-22.docx
21
4.4.10
Use of work devices with protective function
The following devices can be used to support the machine operator during work:
•
clamping devices, push sticks and comparable aids
•
detachable power feeders
•
table extensions
•
approach rails on workpiece guides
4.4.11
Noise Reduction
•
The condition of the tools is important to reduce the noise level.
•
The material and the requirement of the guards must be chosen in such a way that the noise level is reduced.
•
The correct tool speed selection must be used to reduce the noise level.
If the workplace-related noise emission values of the machine exceed 85 dB(A),
suitable hearing protection must be made available to the personnel!
The use of personal hearing protection is not a substitute for the above options.
4.4.12
Standard Safety Equipment
•
The main switch can be locked to protect the machine against unauthorised/unintentional switch-on during
standstill as well as during repair and maintenance work.
•
The machine is equipped with an emergency stop button on the front control panel.
•
The cutter head is covered by means of the protection and pressure device GAMMA V 1629.
•
The milling fence has a hinged protective cover to protect the tool from the top.
•
With the insert rings included as standard, the table opening can be adapted to the tool diameter to keep it
as small as possible.
•
The service door at the front is equipped with a safety switch. This prevents the milling spindle motor from
being switched on when the door is open.
•
The TAPOA 1639 ring fence guard is used for accident-free milling of curved workpieces using a template.
For tools up to Ø 160 mm, with thrust and protection ring, suction nozzle and transparent protective cover.
4.4.13
Optional Safety Equipment
4.4.13.1
Milling Protection and Pressure Device CENTREX 1624
(instead of the standard milling protection and pressure device GAMMA V 1629)
•
Protection and pressure device for secure fixing of workpieces during manual milling operations
•
The special shape of the pressure shoes ensures precise workpiece guidance for all milling operations.
•
The fixture can be folded up and is attached to the milling fence.
4.4.13.2
Table Slide
(instead of the standard table insert rings)
•
For quick, convenient and tool-free adjustment to different tools up to Ø 240 mm.
•
Including front table insert with quick lock for tools up to Ø 155 mm.
•
Available for both table sizes (1100 x 760 mm and 1340 x 800 mm).
4.4.13.3
Kickback Guard 1648
(for milling machines with optional table extension)
•
For accident-free insertion milling of long and short parts (infinitely adjustable from 0 to 1500 mm).
4.4.13.4
Power Feeders
•
For a safe workpiece feed (refer to section
You can find further accessories in chapter
20 and in our online shop
