CABINET SENSOR HARDWARE INSTALLATION
MANUAL
48
Validating and Commissioning the ThermaNode
Installation
Validate and commission the ThermaNode installation by activating the ThermaNode.
Once activated, check the operation of the sensor and node and communication
between these devices and the SynapSense Web Console software application.
Before beginning the following steps, first verify (with lead supervisor or installer) all
necessary installation activities, including software installation and file exports are
completed. Assure all peripheral hardware and software is powered on and functional
(gateway, server, etc.).
•
Power on the ThermaNode.
•
Slide the switch in the recessed slot to the ON
position. Ensure LED light sequence initiates
properly (refer to ThermaNode LEDs in the
following section for more information).
•
If accidental activation occurs, reset node by
sliding the switch to the OFF state, complete
sensor installation, and reactivate node by
sliding the switch to the ON position.
1. Inspect sensor-to-software communication to confirm sensor node operations and
communications. Refer to the Web Console User Guide for detailed information.
2. Open Web Console.
3. Select the data center from the
Sites
list.
4. Click the Data View tab.
5. Select Nodes from the
Data View: dropdown
menu. A tabular view of
the Cabinet Node data
displays.
6. Verify green checkmarks
for each installed node in
