Panduit LS8E-KIT Скачать руководство пользователя страница 64

Страница: 64 / 73

APPLICATION BASED LABEL WIZARD (F4)

Using the TIA/EIA-606-A Compliance Tool in the Label Wizard

1. From within the Label Wizard, select TIA for TIA/EIA-606-A.
2. Use the right and left arrow keys to select the required class (class 1, class

2, class 3, or class 4).

3. Press ENTER.
4. Use the right and left arrow keys to scroll between TIA labeling

applications.

5. Press ENTER for the selected TIA application.
6. Use the right and left arrow keys to scroll within the parameters of each

TIA application.

7. Press ENTER for the selected parameter. An on-screen window will

appear.

8.  Type the value for the selected parameter in the on-screen window.
9.  Press ENTER.
10.  Repeat steps 6-9 for each parameter.
11.  Press  Shift  and  then  F10  to  save  the  serialization  and  exit  the  Label

Wizard.

12. The TIA compliant labels that you have created are stored in a data file.

The data tool appears on the home screen. To edit this file, highlight the
icon on the home screen, press SHIFT, and press the INSERT key.

13. Press F4 to restart the Label Wizard for a new TIA compliant labeling

application.

14. The TIA compliance tool in the LS8E printer is similar to the TIA/EIA-606-

A label wizard function within Easy-

Mark™ labeling software.

Содержание LS8E-KIT










































































Результаты поиска

Содержание LS8E-KIT

Отзывы:

Бренды по названию

Популярные бренды

Panduit LS8E-KIT, Руководство оператора

Результаты поиска

Содержание LS8E-KIT

Отзывы:

Бренды по названию

Популярные бренды