Panduit LS8E-KIT, Руководство оператора

Страница: 27 / 73

CREATING LINES
27
Lines
Lines allows custom placement of vertical and horizontal lines on a label. Lines are
especially useful for creating patch panel, faceplate, or terminal block labels. There
are seven unique line settings available:
Center Horizontal, Center Vertical, Top,
Bottom, Left, Right, and @ Pages. Each of these settings may be turned on or
off independently.
NOTE: The top, bottom, left, and right sides of the label will rotate with the
legend when a label is rotated.
1. The Center Horizontal setting places a line through the center of the label in
the horizontal direction.
2. The Center Vertical setting places a line through the center of the label in the
vertical direction.
3. The Top setting places a line at the top of the label.
4. The Bottom setting places a line at the bottom of the label.
5. The Left setting places a line at the far left side of the label.
A01
A02
A01
A02
A01
A01
A01