Panduit Atlona AT-DISP-CTRL, Руководство по установке

Страница: 5 / 12

5
Installation Guide
AT-DISP-CTRL
The AT-DISP-CTRL includes two mounting brackets and four mounting screws, which can be
used to attach the unit to any flat surface.
1. Position one of the mounting brackets, as shown below, aligning the holes on the side of the
enclosure with one set of holes on the mounting bracket.
2. Use the enclosure screws to secure the mounting bracket to the enclosure.
3. Repeat the above steps to attach the second mounting bracket to the opposite side of the
unit.
4. Mount the unit using the oval-shaped holes, on each mounting bracket. If using a drywall
surface, a #6 drywall screw is recommended.
NOTE: Mounting brackets can also be inverted to mount the unit under a table
or other flat surface.
Mounting Instructions
HDMI IN
HDMI OUT
SOURCE
POWER
AT-DISP-CTRL
HDMI IN
HDMI OUT
SOURCE
POWER
AT-DISP-CTRL
Included screws