Panduit Atlona AT-DISP-CTRL, Руководство по установке

Страница: 8 / 12

8
Installation Guide
AT-DISP-CTRL
Front Panel LED Indicators
The LED indicators on the front panel of the unit provide basic information on the current status
of the AT-CTRL-DISP.
POWER Description
Solid green Unit is powered.
Off Unit is not powered.
•
Check to make sure a USB to mini-USB cable is connected
between the DC 5V / FW port and a computer.
• If using Power over Ethernet (PoE), check the following:
» Verify the AT-DISP-CTRL is connected to a PoE-
capable network switch.
»
Check that the PoE LAN port is being used to
connect to the network switch, not the LAN port.
» The Ethernet cable may be compromised. Try using
a different Ethernet cable. Make sure that the cable
is solid core. Stranded or patch cables are not
recommended.
SOURCE Description
Solid amber The source device is connected to the AT-DISP-CTRL.
Off No source is connected to the AT-DISP-CTRL.
•
Make sure the source is powered and connected to the
HDMI IN port on the AT-DISP-CTRL.
• The HDMI cable may be compromised. Try a different
HDMI cable.