13
12
USER MANUAL
SECURITY-SERVICE SYSTEM PANDORA CAMPER
EN
• Fuel level (status)
• Parking (automatic gearbox) /Handbrake (manual gearbox) status
• “Parking light is not turned off” notification (status)
• Shock sensor (security zone – alarm and warning level)
• Motion sensor (security zone – alarm level)
• Tilt sensor (security zone – alarm level)
• OE alarm system status via CAN, additional sensor (status, security zone – alarm and warning level)
• Turning ignition on (status, security zone – alarm level)
• Opening doors (status, security zone – alarm level)
• Opening a trunk (status, security zone – alarm level)
• Opening a hood (status, security zone – alarm level)
• Pressing brake (status, security zone – alarm level)
Sound and light signalization
DESCRIPTION
STATE
(sound/light)
Arming
1х
/1х
Disarming
2х
/2х
Car search
5х /5х
Alarm, PANIC mode
30sec.
/30sec.
Warning level of a sensor is triggerd
3х
/1х
‘Sensors were triggered’ signal when disarming /
Parking light is not turned off notification /
‘Sensors are triggered” signal when arming
4х
/4х
Engine blocking warning in Anti-Hi-Jack mode
30sec.
/30sec.
Stay Home mode
This mode is used to control the outer perimeter of a vehicle during parking when passengers are inside
the vehicle. This mode allows the system to protect your vehicle against intrusion through the parts of
the vehicle that can be open.
• The system will be armed silently when you activate the “Stay Home” mode, it will be confirmed
with
1х
light
signal. The system controls vehicle security zones and an additional gas sensor (it is
not included in the set) in this mode, built-in sensors (shock/tilt/motion) are disabled in this mode.
• The system will be disarmed when you deactivate the “Stay Home” mode, it will be confirmed with
2х
sound
and
1х
light
signals.
Slave mode
This mode allows arming and disarming using original vehicle control – an original key, button/sensor
of a keyless access entry system.
Slave mode can be implemented using analog connections or a digital protocol of a vehicle.
!
T
his
mode
is
enabled
by
defaulT
for
a
digiTal
proTocol
. m
ore
informaTion
on
loader
.
pandorainfo
.
com
. i
T
is
recommended
To
acTivaTe
The
“p
rohibiT
disarming
when
a
Tag
is
absenT
”
To
increase
securiTy
feaTures
of
The
slave
mode
. i
f
This
mode
is
acTivaTed
,
iT
will
be
possible
To
disarm
The
sysTem
only
when
a
Tag
is
in
The
coverage
zone
or
using
The
“s
ecreT
pin-
code
”.
Owner authorization devices and functions
Authorization devices
Authorization devices are Bluetooth-devices used to recognize an owner in the radio coverage zone
of the base unit. These devices allow implementing security and anti-hijack functions. You can use a
mobile phone, a radio tag BT-760 or a remote control D030 as an authorization device.
Alerts when using authorization devices
It is recommended to use an additional sound emitter Beeper when you use authorization devices.