9
8
USER MANUAL
SECURITY-SERVICE SYSTEM PANDORA CAMPER
EN
Multisystem digital 2хCAN | LIN interface
Integrated digital CAN and LIN interfaces allow connection to digital buses of a vehicle for reading
information (statuses) and controlling vehicles (commands). The LIN-interface can be used to control
Webasto ThermoTopEvo and Eberspacher Hydronic/Hydronic2 heaters.
!
s
ee
deTailed
informaTion
on
loader
.
pandorainfo
.
com
Мicro-USB port
The system has a buil-in micro-USB port that is used for system configuration and update via the
Pandora Alarm Studio. The system can be power from the USB, so you can configure it before installation.
Temperature
The system can determine interior, engine and outside temperature. The following sources are used:
built-in temperature sensor, connector of an external temperature sensor, digital CAN-bus, values from
additional devices.
!
d
efaulT
values
:
inTerior
TemperaTe
–
builT
-
in
sensor
;
engine
TemperaTure
–
exTernal
sensor
;
ouTside
TemperaTure
– can.
Synchronized clock of the baze unit
Built in clock is automatically synchronized with the built-in GPS/GLONASS receiver
!
i
T
is
required
To
seT
correcT
uTc
Time
zone
using
The
mobile
app
or
The
online
-
service
.
Owner’s personal card
!
e
rase
The
proTecTive
layer
carefully
. d
o
noT
use
any
sharp
objecTs
To
avoid
damaging
of
hidden
informaTion
under
The
proTecTive
layer
. T
he
informaTion
is
inTended
only
for
The
owner
.
T
he
card
and
The
hidden
informaTion
cannoT
be
resTored
.
The owner’s personal card contains private information
under a protective layer:
• PIN (the «Secret PIN-code”) is a 4-digit number. This
code can be used to disarm the system and to deactivate
immobilizer functions. It can be also used to enter programming mode. This information cannot be
changed or restored
• LOGIN – is a 10-digit number. This information is used to add the system to the online service and
mobile applications. This information cannot be changed or restored
• PASS – contains 8 characters and can consist of digits, lower and upper case letters. This information
is used to add the module to the online service and mobile applications. This information cannot be
changed or restored.
• Phone number is a phone number of the SIM-card supplied with the system. This number is not used
if you change the SIM-card.
External VALET button
An external VALET button with a three-color status
LED indicator is placed inside a vehicle (see the system
modules layout). The button is used for programing
the system, arming/disarming, activating/deactivating
dimmobilizer mode.
!
o
riginal
vehicle
conTrols
(
buTTons
/
levers
/
pedals
)
can
be
used
as
The
valeT
buTTon
. s
ee
The
deTailed
informaTion
on
loader
.
pandorainfo
.
com
.
LED INDICATOR
VALET BUTTON
2-2-2-2
PIN