37
36
USER MANUAL
SECURITY-SERVICE SYSTEM PANDORA CAMPER
EN
1. Emergency activation/deactivation the immobilizer function
After entering programming mode, press the VALET button 15 times. Pauses between presses should
not exceed 1 second. Each pressing will be confirmed with an orange LED indicator flash. The system
will confirm entering the 15th level with the red flashes of the LED and short signals of the Siren/Beeper.
• Deactivate immobilizer: The LED indicator will be green after entering the programming
level. The system will wait 10 seconds for entering the ‘Secret PIN-code’. Enter the ‘Secret
PIN-code’ that is written on the owner’s plastic card. If the PIN-code is not entered within
10 seconds or the input is incorrect, the siren will sound one signal, the LED will produce
the series of red and green flashes and the system will return to the programming menu.
The system will confirm deactivating with two sound signals of the siren, a long red LED flash and
the series of signals of the Beeper. After that, the system will return to the programming menu.
Turn on the ignition and then turn off to exit programming mode. The immobilizer will be deactivated.
• Activate immobilizer: The LED indicator will light red and the Beeper will sound a long
beep after entering the programming level. The system will wait for action. Press the
VALET button once activate the immobilizer function. The system will confirm enabling
with one short sound signal of the Siren/Beeper and a green LED light. Turn on the
ignition and then turn off to exit programming mode. The immobilizer will be activated.
2. Emergency activation/deactivation the code immobilizer function (pin-to-drive).
After entering programming mode, press the VALET button 13 times. Pauses between presses should
not exceed 1 second. Each pressing will be confirmed with an orange LED indicator flash. The system
will confirm entering the 13th level with the red flashes of the LED and short signals of the Siren/Beeper.
• Deactivate code immobilizer: The LED indicator will be green after entering the programming
level. The system will wait 10 seconds for entering the ‘Secret PIN-code’. Enter the ‘Secret
PIN-code’ that is written on the owner’s plastic card. If the PIN-code is not entered within
10 seconds or the input is incorrect, the siren will sound one signal, the LED will produce
the series of red and green flashes and the system will return to the programming menu.
The system will confirm deactivating with two sound signals of the siren, a long red LED flash and
the series of signals of the Beeper. After that, the system will return to the programming menu.
Turn on the ignition and then turn off to exit programming mode. The code immobilizer will be
deactivated.
• Activate code immobilizer: The LED indicator will light red and the Beeper will sound a long beep
after entering the programming level. The system will wait for action. Press the VALET button once
activate the immobilizer function. The system will confirm enabling with one short sound signal of
the Siren/Beeper and a green LED light. Turn on the ignition and then turn off to exit programming
mode. The code immobilizer will be activated.
Warranty obligations
Manufacturer guarantees correct operation of the service-security system if exploitation, installation,
storage and transportation conditions described in this manual were met.
The system should only be used according to installation scheme and user manuals.
The system is meant to be installed by the professional car electronics installers. The installer should
fill in installation certificate that is included in this manual.
Parts malfunctioning during warranty period on the fault of the manufacturer should be repaired
or replaced by the installation center of the manufacturer or by certified service center. List of certified
service centers can be found on pandorainfo.com
The user loses the right for warranty services in the following cases:
• when warranty period expires;
• if exploitation, installation, storage or transportation conditions were not met;
• if there is mechanical damage of the external parts of the system after it is sold.
This includes: fire damage, consequential damage in case of car accident, aggressive liquids and
water seeping damage, damage caused by improper use;
• if the damage was caused with incorrect settings and parameter adjustment;
• if system devices are replaced with any devices that are not recommended by the manufacturer;
• if manufacturer sealing is broken;
• if there is no properly filled warranty card and installation certificate.
Warranty period is 3 years since the moment of purchase, but no more than 3.5 (three and a half)
years since the moment of production. This warranty does not include batteries of the remotes, as they
have their own service lifetime.
Maintenances and repairs of the system with expired warranty period are carried out at the expense
of the user on a separate contract between the user and the installer/service center.
!
w
e
recommend
ThaT
you
ask
an
insTaller
To
fill
ouT
The
insTallaTion
cerTificaTe
and
The
warranTy
card
. T
hese
documenTs
may
be
required
for
conTacTing
The
cusTomer
supporT
.