31
30
USER MANUAL
SECURITY-SERVICE SYSTEM PANDORA CAMPER
EN
doors unlocking
system disarming
2x /2x
SLAVE
HANDS FREE
MOBILE APP
0 *
Delayed arming
If when leaving the car you cannot arm it using a remote control (you have your hands full), you can use
delayed arming. To activate this mode, shortly press the
and
buttons simultaneously. The LED
indicator will turn red, the system will lock doors and will arm in 30 seconds, the siren will sound and turn
signals will flash once, indicating that the mode is triggered.
To activate this mode without sound confirmation, press and hold both and buttons for 1 second
until a sound and vibration signal.
To cancel delayed arming when it is triggered, simply press the
button.
Disarming
To disarm the system, use one of the methods described below. The system will confirm the
command with 2 short sound signals
and 2 flashes of turn indicators
.
Remote control
Shortly press the
, button on the remote control when you are in the radio coverage zone. The
remote control will play “DISARMING” ringtone and security mode status icon (the lock) will be changed
to .
To disarm the system without sound confirmation press and hold the
button for 1 second or more.
Radio tag
A radio tag must be in the Bluetooth coverage area. Shortly press the control button
on the tag .
Slave mode
Shortly press the “Unlock” button on an original remote control or use a sensor/button on a door handle
(for cars with an intelligent access system).
Phone
Call the system number. Wait for the answer. Dial the
0 *
command.
To disarm the system without siren signals dial the
0 *
0
command.
Online service
Login to the PANDORA-ON.COM, when the system is online (there is an Internet connection) press the
on the control panel.
Mobile application
Open the mobile application. When the system is online (there is an Internet or Bluetooth connection),
press and hold the button on the control panel until the scale is fully loaded.
HandsFree mode
Move toward the vehicle with an authorization device .
VALET button
Enter the ”Secret PIN-code” (see the ”Emergency disarming using the VALET button” section).
Locking/unlocking doors when ignition is on
The system allows you to lock and unlock doors when ignition is on. To do this, use one of the
methods described below.
Remote control
Press the
button to lock doors or the
button to unlock doors when you are in the radio
coverage zone.
Mobile application
Open the mobile application. When the system is online (you are in the radio coverage area), press and
hold the button to lock doors or the button to unlock doors on the control panel until the scale
is fully loaded.