manualshive.com logo in svg

Panasonic WVCU550C - SYSTEM CONTROLLER UNIT, Руководство по эксплуатации

Поделиться
Скачать
Panasonic WVCU550C - SYSTEM CONTROLLER UNIT Скачать руководство пользователя страница 80

84

4

■

Camera Title

This table is used to edit the camera titles to be displayed on the monitor screen.
There are 128 camera titles available.
Each title is composed of 15 characters per line, times 2 lines.

To program or edit the Camera Title Table, do the following:

1. Move the cursor to position 2 by moving the Joystick Controller, then press the 

CAM (SET)

key.

2. Move the cursor with the Joystick Controller to the desired camera number to edit a title (position 3) by moving the Joystick

Controller.
Press the Function 

F4

button to open the Pop Up Window.

The character table appears to the right of the Camera Title table as shown above.

3. Select the desired character from the table by moving the Joystick Controller. Then press the 

INC +1CAM

button to pick

up the character, and place it in the title editing area.

4. If a wrong character is selected, press the 

DEC –1CAM

button to delete the character positioned immediately to the left of

the cursor.
Select a character by moving the Joystick, and then press the 

INC +1CAM

button to replace the character where the cur-

sor is positioned.

5. Repeat the above procedures until the title for a selected camera is completed.

Then press the 

CAM (SET)

key to save that title. The character table disappears.

6. Repeat the above procedures to edit other camera titles on this page.

When satisfied with the titles, press the Function 

F1

button to select the next page. Repeat the above procedures until the

titles for all cameras are completed.

7. Press the Function 

F2

button to go back to the previous page.

8. When satisfied with all the camera titles, press the 

MON (ESC)

key to escape from the programming mode.

The cursor returns to position 2.

S e t

U p

C a m e r a

F 1 : N e x t

F 2 : P r e

F 3 : D E L

F 4 : P o p

T i t l e

C A M

C A M

T i t l e

0 1

0 2

U p

1 s t

F l o o r

L O B B Y
R O O M

1 0 4

0 3

2 n d

0 4

C o m p u t e r
3 r d
R O O M

1 0 6

0 5

G A T E

0 6

0 7

R o o m

0 8

R O O f

1 0 0 - a

H a l l

1 0

F l o o r

R o o m

F L O O R

P a g e

P a g e

A B C D E F G H I J K L M N
O P Q R S T U V W X Y Z Ø Ä

o p q r s t u v w x y z

a b c d e f g h i j k l m n

% & ’ ( ) = + * - : ; • , .

0 1 2 3 4 5 6 7 8 9 ! ” # $

/ ?

I N C . . P i c k

U p

D E C . . B a c k

S p a c e

C e n t e r

q

w

e

Содержание WVCU550C - SYSTEM CONTROLLER UNIT



































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды