manualshive.com logo in svg

Panasonic WVCU550C - SYSTEM CONTROLLER UNIT, Руководство по эксплуатации

Поделиться
Скачать
Panasonic WVCU550C - SYSTEM CONTROLLER UNIT Скачать руководство пользователя страница 46

48

3

INSTALLATIONS

Remove screws.

Side Panel

Palm-rest

Remove Screws.

Rubber
feet

Rack Mount Screws

Rubber
feet

■

WJ-SX550C Matrix Switcher
WJ-AD550 Extension Unit

●

Mounting into the Rack

1. Remove four rubber feet by removing four screws from

the bottom of the Matrix Switcher (Extension Unit).

2. Install the Matrix Switcher (Extension Unit) in the rack

securing it with eight screws (not included).

• The cooling fans inside the Matrix Switcher (or Extension Unit) are subject to wear and need to be replaced periodically.
• Do not block the ventilation opening or slots on the cover to prevent the temperature from rising inside the unit.

Always keep the temperature in the rack within 45˚C (113˚F).

• If the rack is subject to vibration, secure the rear of the unit to the rack using additional mounting brackets (procured

locally).

Cautions

The installation described below should be made by qualified service personnel or system installers and should con-
form to all local codes.

■

WV-CU550C System Controller

●

Replacing the Side Panels with the optional WV-Q62 Rack Mounting Brackets

1. Remove both the left and right side panels of the System Controller by removing four screws.
2. Remove the Palm-rest located on the front of the System Controller by removing two screws.
3. Place the Rack Mounting Brackets on both sides of the System Controller and tighten with the four supplied screws. 
4. Install the System Controller with Rack Mounting Brackets in the rack by using four screws (procured locally).

Tighten
screws.

Rack Mounting Bracket

Rack Mount Screws

Rack Mount Screws

Содержание WVCU550C - SYSTEM CONTROLLER UNIT



































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды