manualshive.com logo in svg

Panasonic WVCU550C - SYSTEM CONTROLLER UNIT, Руководство по эксплуатации

Поделиться
Скачать
Panasonic WVCU550C - SYSTEM CONTROLLER UNIT Скачать руководство пользователя страница 112

117

5

●

Camera Setup

The following function requires the use of cameras
equipped with the specific feature.

1. Select the desired monitor and camera.

Refer to the Monitor Selection and Camera Selection.

2. Select the Camera Set Up 

(D4)

Menu on the LCD dis-

play by pressing the appropriate Direction button.

Note:

The default setting for the Camera Setup Menu is

On. Pressing the Function 

(F1)

button at this

moment will allow access to the Camera Set up
menu if such access is authorized by the opera-
tor's level.
If “PROHIBITED” appears on the LCD display,
press the 

MON (ESC) 

key to return the Camera Set

Up Menu display.

3. Press the Function

(F1)

button to gain access to the

Camera Set Up Menu.
The menu displayed may look as follows:

F 2

F 3

F 4

Camera Set Up Menu
 On             Exit

F 1

D4

4. Select the desired item parameter by moving the

Joystick Controller UP and DOWN, and then select the
desired desired mode by moving the Joystick
Controller LEFT and RIGHT.
Press the 

CAM (SET)

key to execute the setting or

enter sub menu, and press the 

MON (ESC)

key to

escape from the setup mode or menu.

5. Press the Function 

(F2) 

button to reset the selected

menu, or press the Function 

(F3)

button to reset all set-

tings to factory default setting.

Refer to the Operating Instructions of the selected cam-
era for further details.

Note

6. Press the Function 

(F4)

button to return to the original

screen.

Caution: 

If camera setup is started with buttons on the

camera, all settings must be made with the buttons
on the camera's.
If camera setup is started with a Matrix Switcher, all
settings must be made with the Matrix Switcher.

    ** SET UP **

CAMERA ID    OFF
ALC/ELC      ALC
SHUTTER      OFF
AGC          ON
SENSE UP     OFF
SYNC         INT
WHITE BAL    ATW
WIDE D-RANGE OFF
MOTION DET   OFF
DNR          OFF
 END    SET UP ENABLE

Camera Set Up Menu
     Res A.Res  Exit

F 1

F 2

F 3

F 4

Содержание WVCU550C - SYSTEM CONTROLLER UNIT



































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды