83
4
●
Operator Registration
This table is used to establish operator numbers for the users of the system along with associated passwords, operator levels
and priorities.
Up to 30 operators may be registered.
Additionally, operator limits for camera access are set on this table.
To program or edit the Registration Table, do the following:
1. Move the cursor to position 3 by moving the Joystick Controller.
Enter an operator number (1-30) by pressing the Numeric keys, and then press the
CAM (SET)
key.
2. Move the cursor to position 4 by moving the Joystick Controller.
Enter the desired Level number (1-5) by pressing the Numeric keys.
3. Move the cursor to position 5 by moving the Joystick Controller.
Enter the desired Priority number (1-30) by pressing the Numeric keys.
4. Move the cursor to position 6 by moving the Joystick Controller.
Enter a 5-digit Password Number by pressing the Numeric keys.
5. Move the cursor to position 7 by moving the Joystick Controller.
Press the
INC +1CAM
button or
DEC –1CAM
button repeatedly to select the desired operator limit displayed on the table.
m
:
Enables Video and pan/Tilt control.
i
:
Enables only Video Control.
]
:
Disables control.
6. Repeat the above procedures until all operator limits are completed in this table.
7. After completing the table, press the Function
F1
button to select the next page. Repeat the above procedures until all
operator limits have been established.
8. Press the Function
F2
button to back up to the previous page.
9. When satisfied with all of the above steps, press the
MON (ESC)
key to escape from the programming mode.
The cursor returns to position 3.
10. Similarly, repeat the above procedures to register all other operators.
Notes:
• Operator number 00 is allotted to the Timer.
The factory default setting is priority 30.
• If the system is operated by programmed Timer Events, it is recommended to use higher priorities (lower numbers).
If the system is operated manually by an operator, use lower priorities (higher numbers).
Cautions:
• To prevent unauthorized access, be sure to change the Password preset at the factory.
• If an operator's level for access to the item “Set Up Menu” or “Operator” on the Level Table has not been registered, the
operator will not be allowed access to the Set Up Menu a second time.
S e t
U p
F 1 : N e x t P a g e
F 2 : P r e P a g e
F 3 : D E L
F 4 : P o p
O P E .
R E G .
O p e r a t o r
L e v e l
C A M
0 1
P r i o r i t y
S E L
S E L
0 2
0 3
0 4
0 5
0 6
0 7
0 8
0 9
1 0
1 1
1 2
1 3
1 4
1 5
1 6
C A M
1 7
1 8
1 9
2 0
2 1
2 2
2 3
2 4
2 5
2 6
2 7
2 8
2 9
3 0
3 1
3 2
C A M
3 3
3 4
3 5
3 6
3 7
3 8
3 9
4 0
4 1
4 2
4 3
4 4
4 5
4 6
4 7
4 8
U p
1 0
0 1
S E L
C A M
S E L
4 9
5
6 4
6 3
6 2
6 0
6 1
5 7
5 8
5 9
5 4
5 5
5 6
5 3
5 2
5 1
5 0
. . V i d e o
&
P T Z
C o n t .
. . V i d e o
. . V i d e o
O n l y
L o c k o u t
P a s s W o r d
1 2 3 4 5
P a g e 1 o f 2
q
w
t
r
y
u
e
Содержание WVCU550C - SYSTEM CONTROLLER UNIT
