[SNMPv3] - [Password]
Set the SNMPv3 password.
•
Available number of characters:
•
If the authentication method is MD5: Empty field or 8 - 16 characters
•
If the authentication method is SHA1: Empty field or 8 - 20 characters
•
Unavailable characters:
" &
[System name]
Enter a system name to be used to manage the camera with the SNMP function.
•
Available number of characters:
0 - 32 characters
•
Default:
None (blank)
[Location]
Enter the name of the location where the camera is installed.
•
Available number of characters:
0 - 32 characters
•
Default:
None (blank)
[Contact]
Enter the E-mail address or the phone number of the SNMP manager.
•
Available number of characters:
0 - 255 characters
•
Default:
None (blank)
2.8.2.7 Configure the QoS settings
The settings relating to the Diffserv function and shaping of stream are configured in this section.
Diffserv
The Diffserv function can be used to set the priority of image data sent from routers.
The priority set to this function must match the DSCP value configured to the router.
When using the Diffserv function, contact the network administrator.
[Image DSCP(0-63)]
Enter the packet priority for video data.
•
Available values:
0 - 63
•
Default:
0
134
Operating Instructions
2 Settings
