![background image](http://html.mh-extra.com/html/panasonic/wv-sud638/wv-sud638_operating-instructions-manual_1511944095.webp)
•
Default:
40ms
Note
•
When a shorter interval is selected, the delay time will be shorter. When a longer interval is selected,
audio interruption may be diminished even though the delay time will be longer. Select the interval
according to the network environment.
•
“Mic input interval (Camera to PC)” is unavailable when “AAC-LC” or "AAC-LC (HIGH QUALITY)" is
selected for “Audio encoding format”.
[Audio output volume (PC to Camera)]
Select a volume level on the camera to hear audio transmitted from the PC.
High/Middle/Low
•
Default:
Middle
[Audio output interval (PC to Camera)]
Select an interval for audio transmission from the following.
160ms/320ms/640ms/1280ms
•
Default:
640ms
Note
•
When a shorter interval is selected, the delay time will be shorter. When a longer interval is selected,
audio interruption may be diminished even though the delay time will be longer. Select the interval
according to the network environment.
•
Audio may temporarily be interrupted and noise may be heard when multiple users are accessing the
camera concurrently. It may be possible to diminish the interruption or noise by setting a longer interval
for “Audio output interval (PC to Camera)”.
•
Audio may sometimes not be heard depending on the network environment.
[Audio output duration]
Configure the maximum duration for each time audio is outputted.
1min/2min/3min/5min/10min/20min/30min/1h
•
Default:
5min
Note
•
Audio output stops when the specified time has passed. To turn the audio transmission function on,
click the Audio output button again.
[Audio output port (PC to Camera)]
Enter the transmission port number (the port number on the camera used to receive audio data transmitted
from the PC).
•
Available port number:
1024 to 50000 (Only even numbers are available.)
•
Default:
34004
Note
•
The transmission port number entered for “Audio output port (PC to Camera)” will be used only when
“Unicast port (MANUAL)” is selected for “Transmission type” (page 53). When “Off” is selected for “H.
264 transmission” (page 49) or when “Unicast port (AUTO)” or “Multicast” is selected for “Transmission
type”, it is not necessary to enter the transmission port number.
[Permission level of audio trans./recep.]
Select an access level for audio reception from the following.
1. Level 1 only/ 2. Level 2 or higher/ 3. All users
•
Default:
3. All users
Operating Instructions
95
8 Configure the settings relating to images and audio [Image/Audio]
Содержание WV-SUD638
Страница 60: ...60 Operating Instructions 8 Configure the settings relating to images and audio Image Audio ...
Страница 195: ... When using a firewall including software allow access to all UDP ports Operating Instructions 195 16 Using the CD ROM ...
Страница 210: ...210 Operating Instructions Notes ...
Страница 211: ...Operating Instructions 211 Notes ...