![background image](http://html.mh-extra.com/html/panasonic/wv-sud638/wv-sud638_operating-instructions-manual_1511944187.webp)
•
Wiper rubber exchange timing notification
An external notification is sent when the wiper rubber operation counter gets close to the exchange
guideline number.
External notification methods
•
Notifying via email
Damage notifications are made to the registered notification address when “On” is selected for “E-mail
notification” of “E-mail server >>” in the [Alarm] tab of the “Alarm” page. The settings for the email
notifications can be configured in the [Alarm] tab of the “Alarm” page (
®
tab of the “Network” page (
•
Notifying a specified address (Panasonic alarm protocol notification)
Damage notifications are made to the registered notification address when “On” is selected for “Panasonic
alarm protocol notification”(
®
This function is available only when a Panasonic device, such as the network disk recorder, is connected
to the system. The settings for Panasonic alarm protocol can be configured in the [Notification] tab of the
“Alarm” page. (
®
15.4 Reset the settings/Reboot the camera [Default
reset]
Click the [Default reset] tab of the “Maintenance” page. (
The settings and the HTML data of the camera can be initialized and reboot of the camera can be performed
on this page.
[Reset to the default (Except the network settings)]
Click the [Execute] button to reset the settings to the default. Note that the network settings will not be reset.
It is impossible to operate the camera for about 3 minutes after the initialization.
[Load the default HTML files (setup menu).]
Click the [Execute] button to reset the HTML files to the default.
It is impossible to operate the camera for about 3 minutes after the initialization.
[Reset to the default and load the default HTML files.]
Click the [Execute] button to reset the settings of the camera and the HTML files to the default. Note that the
network settings will not be reset.
It is impossible to operate the camera for about 3 minutes after the initialization.
Operating Instructions
187
15 Maintenance of the camera [Maintenance]
Содержание WV-SUD638
Страница 60: ...60 Operating Instructions 8 Configure the settings relating to images and audio Image Audio ...
Страница 195: ... When using a firewall including software allow access to all UDP ports Operating Instructions 195 16 Using the CD ROM ...
Страница 210: ...210 Operating Instructions Notes ...
Страница 211: ...Operating Instructions 211 Notes ...