![background image](http://html1.mh-extra.com/html/panasonic/wv-s2500-series/wv-s2500-series_operating-instructions-manual_4266501014.webp)
[Log] button
S11x2
S11x1
S15x1
S25x1
S22x1
S21x1
When the [Log] button is clicked, the log list will be displayed and images saved on the SD memory card
can be played.
Refer to page 31 for further information about the log list and for how to play images on the SD memory
card.
RS485(pan/tilt head)
S11x2
This button is available only when the [RS485 operation screen] in the [RS485] tab is set to “On(pan/tilt
head)”. (
page 204) If you click the button, the screen to control the pan/tilt head will be displayed.
IMPORTANT
•
Depending on the pan/tilt head connected to, some functions may not be available. Refer to the
specifications of your pan/tilt head for more information. Refer to the operating instructions of the
pan/tilt head for further information about its operation.
[Viewer Software] button
Starts installation of the viewer software for display. This button will not be available if the viewer software
is already installed on the PC, or if the “Automatic installation” of the [Viewer software
(nwcv4Ssetup.exe)] in the [Basic] tab is set to “Off”. (
®
Camera title
The camera title entered for “Camera title” on the [Basic] tab will be displayed. (
®
Support button
When this button is clicked, the support site below will be displayed in a newly opened window. This website
contains technical information, FAQ, and other information.
http://security.panasonic.com/support/
Alarm occurrence indication button
When an alarm occurs, the display flashes. When this button is clicked, the output terminal will be reset
and this button will disappear. (
Note
•
Since the blinking of the alarm occurrence indication button is not coupled to recording images to
the SD memory card, forwarding E-mails, or other operations, check the settings of each operation
separately.
Full screen button
Images will be displayed on a full screen. If the full screen button is clicked once when the image displayed
in the main area is smaller than the main area, the image is displayed corresponding to its image capture
size. If the full screen button is clicked once when images are displayed corresponding to their image
capture sizes, images are displayed in full screen. To return to the “Live” page when displaying an image
in full screen, press the [Esc] key.
Snap shot button
Click this button to take a picture (a still picture). The picture will be displayed on a newly opened window.
When right-clicking on the displayed image, the pop-up menu will be displayed. It is possible to save the
image on the PC by selecting “Save” from the displayed pop-up menu.
When “Print” is selected, printer output is enabled.
14
Operating Instructions
1 Operations
Содержание WV-S2500 Series
