![background image](http://html1.mh-extra.com/html/panasonic/wv-s2500-series/wv-s2500-series_operating-instructions-manual_4266501013.webp)
The image in the main area is displayed based on the contents set in Stream(1) – (4) (
®
JPEG(1) – (3) (
®
Also the first stream displayed when you accessed the camera can be set from “Initial display stream” of
the [Image] tab. For “Multi-screen”, you can set the “Initial display” in the [Multi-screen] tab.
Note
•
When “2048
´
1536”, “1920
´
1080”, “1280
´
960” or “1280
´
720” is selected for the image capture
size, it may become smaller than the actual size depending on the window size of the web browser.
Stream information display
Displays the setup for stream encoding format, image capture size, bit rate, and frame rate for the live view
of a stream.
Note
•
Displays the values set in the stream. The actual bit rate and frame rate vary depending on the
network environment and the used PC.
[Refresh interval] pull-down menu
This pull-down menu will be displayed only when a JPEG image is displayed. Use it to select the display
method of the JPEG image.
•
MJPEG:
Uses viewer software to display JPEG images successively as MJPEG (Motion JPEG). Not
available if the viewer software is not installed.
•
Refresh interval : 1s/Refresh interval : 3s/Refresh interval : 5s/Refresh interval : 10s/Refresh
interval : 30s/Refresh interval : 60s:
Refreshes JPEG format (still images) images at the specified
interval.
Note
•
Depending on the network environment or the PC used, JPEG format (still images) images may
not be refreshed at the specified interval.
[Zoom] buttons
Images will be zoomed in on with the electronic zoom by the viewer software “Network Camera View
4S”.
•
[x1] button:
The images in the main area will be displayed at x1.
•
[x2] button:
The images in the main area will be displayed at x2.
•
[x4] button:
The images in the main area will be displayed at x4.
[Brightness] buttons
The brightness is adjustable from 0 to 255. Click the
button to make the image brighter, or click the
button to make the image darker. If you click the [Normal] button, the display will be reset to default.
[AUX] button
S11x2
S11x1
S15x1
S25x1
S22x1
S21x1
These buttons will be displayed only when “Terminal 3” of “Alarm” is set to “AUX output” on the setup menu.
(
®
•
[Open] button:
The status of the AUX connector will be open.
•
[Close] button:
The status of the AUX connector will be closed.
Note
•
The names of “AUX”, “Open” and “Close” can be changed. (
®
S11x2
S11x1
S15x1
S25x1
S22x1
S21x1
The [Rec. on SD] button will be displayed only when “Manual” is selected for “Save trigger” on the [SD
memory card] tab. (
®
Click this button to manually record images on the SD memory card. Refer to page 25 for descriptions
of how to manually record images on the SD memory card.
Operating Instructions
13
1 Operations
Содержание WV-S2500 Series
