manualshive.com logo in svg

Panasonic WV-S2500 Series, Руководство по эксплуатации

Поделиться
Скачать
Panasonic WV-S2500 Series Скачать руководство пользователя страница 130

The names of “AUX”, “Open” and “Close” on the “Live” page can be changed.

AUX title

[AUX (Up to 10 characters)]

Enter the name for “AUX” on the “Live” page.

•

Unavailable characters:

 " &

•

Default:

 AUX

[Open (Up to 5 characters)]

Enter the name for “Open” of “AUX” on the “Live” page.

•

Unavailable characters:

 " &

•

Default:

 Open

[Close (Up to 5 characters)]

Enter the name for “Close” of “AUX” on the “Live” page.

•

Unavailable characters:

 " &

•

Default:

 Close

Note

•

When AUX setting is not available, AUX name cannot be changed.

•

AUX is a camera terminal that allows users to operate (Open/Close) arbitrarily from the “Live” page.
For example, an operator can remotely control lights in a place where the camera is installed by
connecting the terminal to the light controller.

2.7.4  Configure the settings relating to the camera action on alarm
occurrence [Alarm]

Click the [Alarm] tab on the “Alarm” page. (

®

page 41, page 42)

The settings related to the camera action on alarm can be configured in this section.

130

Operating Instructions

2 Settings

Содержание WV-S2500 Series













































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды