10
Action at an alarm occurrence
When a "Terminal alarm", "VMD alarm", "Scene change detection alarm" or "Command alarm" occurs, alarm
action is performed according to the setup for that alarm. For details on how to set alarms, refer to the Setup
Manual.
Alarm type
Action at an alarm occurrence
• Display of the [Alarm occurrence indication] button on the "Live" page (
→
Setup Manual)
The [Alarm occurrence indication] button will be displayed
and will blink on the "Live" page when an alarm occurs.
Important
• When "Polling(30 sec)" is selected for "Alarm status update mode", the [Alarm occurrence indication]
button will be refreshed in 30-second intervals. For this reason, it may take a maximum of 30 seconds
until the alarm occurrence indication button is displayed on the "Live" page when an alarm occurs.
(
→
Setup Manual)
Terminal alarm
: Alarm action will be performed when the alarm device connected to the
cable is activated.
VMD alarm
: Alarm action will be performed when a change (i.e. motion) is detected
in the image in the set VMD area.
*VMD stands for "Video Motion Detector".
Scene change detection alarm
: The alarm sounds if the machine is covered with a cloth, the orientation
is changed or some other interference occurs.
Command alarm
: Alarm action will be performed when a Panasonic alarm notice is
received from a connected device via the network.
