3
Viewer Software
• Images will not be displayed when the viewer software "Network camera View3" is not installed on the
PC. This software can be installed directly from the camera or by double clicking "nwcv3setup.exe" on the
CD-ROM provided, and then following the on-screen instructions.
Important
• The default setting of "Automatic installation of Viewer
software" is "ON". Follow the instructions on Setup
Manual when the message is displayed on the
information bar of the browser.
• When the "Live" page is displayed for the first time,
the install wizard of the ActiveX control required to
display images from the camera will be displayed.
Follow the instructions of the wizard.
• When the install wizard is displayed again even after
completing the installation of the ActiveX, restart the
PC.
• The viewer software used on each PC should be licensed individually. The number of installations of the
viewer software from the camera can be checked on the [Upgrade] tab of the "Maintenance" page
(
→
Setup Manual). Refer to your dealer for the software licensing.
