7
Monitor images from a single camera
• Web browser window
1
Launch the web browser on the PC.
2
Enter the IP address designated using the Panasonic
IP setup software (
→
Operating Instructions) in the
[Address] box of the browser.
(Example: http://192.168.0.10)
.......................................................................................
Note
• When the HTTP port number has been changed from
"80", enter "http://IP address of the camera:port
number".
• When the DDNS function has been set to "ON", enter
"http://host name registered to DDNS
server.nmdns.net/".
• When this camera is to be used in a local area
network, configure the web browser to bypass the
proxy server for the local address.
............................................................................................
• "Live" page
3
Press the [Enter] key.
If user authentication is turned "ON" then the user
name and password input screen appears.
Enter a registered user name and password.
(
→
Setup Manual)
Important
• The default user name is "admin" and default
password is "12345".
To enhance the security, be sure to change the
password for the user name "admin".
• When displaying multiple MPEG-4 images on a PC,
images may not be displayed depending on the
performance of the PC.
For details on the required PC environment, refer to
Operating Instructions.
4
Display images from the camera.
2
