12
• Notice of an alarm occurrence by e-mail (
→
Setup Manual)
Alarm mail (notification of an alarm occurrence) can be
sent to preregistered e-mail addresses when an alarm
occurs. Up to 4 addresses can be registered to receive
the alarm mail. An alarm image (still picture) can be sent
with the alarm mail as an attached file.
The settings for alarm mail can be configured on the
[Notification] tab of the "Alarm setup" page and on the
[Mail] tab of the "Server setup" page (
→
Setup Manual).
• Notice of an alarm occurrence to desired IP addresses (Panasonic alarm protocol) (
→
Setup
Manual)
Preset IP addresses can be notified of an alarm
occurrence.
This function is available only when a Panasonic device,
such as the network disk recorder, is connected to the
system. When "ON" is selected for "Panasonic alarm
protocol", the connected Panasonic device will be notified
that the camera is in the alarm state.
The settings for Panasonic alarm protocol can be
configured on the [Notification] tab of the "Alarm setup"
page.
