48
Initialize/restart the camera [Initialization]
Click the [Initialization] tab of the "Maintenance" page. (
☞
page 15)
Initialization of the setup data and HTML files of the camera and restarting of the camera can be performed on this
page.
[Initialize setup data]
Click the [Execute] button to reset the settings to the
default. However, the network settings will not be reset.
It is impossible to operate the camera for around 1
minute after the initialization.
[Initialize HTML data]
Click the [Execute] button to reset the HTML files to the
default. It is impossible to operate the camera for
around 1 minute after the initialization.
[Initialize setup data and HTML data]
Click the [Execute] button to reset the settings of the
camera and the HTML files to the default. However, the
network settings will not be reset. It is impossible to
operate the camera for around 1 minute after the initial-
ization.
[Restart]
Click the [Execute] button to restart the camera. The
camera will be inoperable for around 1 minute after the
restart just as when the power is turned on.
Notes:
• To initialize the network settings, turn off the power
of the camera first. Then, turn on the power of the
camera while holding down the [INITIAL SET] button
of the camera. Wait around 5 seconds without
releasing the [INITIAL SET] button. Wait around 30
seconds after releasing the button. The camera will
restart and the settings including the network set-
tings will be initialized.
• When the notification function is on, notification will
be provided to the registered addresses (mail
address or IP address) when the SD memory card
has failed to mount after the restart or when the
inserted SD memory card is locked. (
☞
pages 32
and 33)
