4
PREFACE
The WV-CU161 System Controller is designed for one-to-one use with the Combination Camera such as the WV-CS854/WV-
CS654/WV-CS604 Combination Camera or the WV-RC100/WV-RC150 Receiver.
Camera control is performed by multiplexing the control signal with the video signal by connecting an AV Codec or the like, or
via RS-485 site communication*
1
.
Alarm signals, such as motion detector signals, can be supplied to external equipment from a built-in alarm output connector.
An alarm input connector allows moving the camera to the preset position when an alarm is activated.
The WV-CU161 is capable of downloading preset data from a camera such as the WV-CS854, save it in memory, and upload
it to the other combination cameras.
It can also control the camera patrol learning operations, including camera lenses, electronic zoom, auto focus, and pan/tilt
heads.
Consult your dealer about camera models suitable for uploading and downloading data. Please also refer to the Operating
Instructions of other peripherals.
FEATURES
The WV-CU161 offers the following functions:
Remote control*
3
of the camera*
2
and the WV-CU161 System Controller, including:
1 Pan/Tilt: Slow Pan/Slow Tilt/Auto Pan/Auto Sequence/Auto Sort/Random
2 Lens functions: Iris/Focus/Auto Focus/Zoom
3 Preset (Selection/Program)/Home/Camera Patrol (Learn/Play/Stop)
4 Color/Black and White selection
5 Housing: Defroster/Wiper/Auxiliary 1, 2
6 External Devices (Power On/Off)
7 Alarm (Suspend/Reset)
8 Camera setup
Note:
The WV-CU161 is not provided with functions to control the audio signal. Audio communication is not possible, regard-
less of whether audio boards are installed in the receiver.
*1 Communicate via RS-485 site communication is disabled in a daisy-chain connection.
*2 Controlling the same combination camera from multiple WV-CU161 units installed in different locations is not possible.
*3 For remote control functions refer to the Operating Instructions of the combination camera.