24
CAMERA CONTROL FUNCTIONS
It is necessary to setup the camera before using the cam-
era control functions. For further information, refer to the
Operating Instructions for the respective combination cam-
era (See page 30). You can also set it up from Camera
Setup menu if you operate a system.
■
Pan/Tilt Control
The following function is available with a combination cam-
era or pan/tilt head.
Move the pan/tilt head in the desired direction using the
joystick.
The camera can be moved in eight directions.
To move the pan/tilt head slowly, move the joystick while
holding down the
SLOW/CAMERA FUNCTION
button.
Note:
The SLOW/CAMERA FUNCTION button cannot be
used in the camera or pan/tilt head which is not provid-
ed with 8-steps speed.
OPERATING PROCEDURES
ª
”
¶
E
Joystick
■
Lens Control
The following functions are available with cameras provided
with controllable lens.
1. Press the
FOCUS NEAR
or
FOCUS FAR
button to
adjust the lens focus while watching the monitor.
NEAR
FAR
FOCUS
AUTO FOCUS
If you are using a camera with an auto focus feature,
the lens focus can be automatically adjusted by press-
ing the
FOCUS NEAR
and
FOCUS FAR
buttons simul-
taneously.
2. Press the
ZOOM TELE
button to optically bring the
object closer, or press the
ZOOM WIDE
button to opti-
cally widen the scene.
WIDE
TELE
IRIS
ZOOM
CLOSE
OPEN
IRIS RESET
Focal length differs depending on the lens installed on
the camera.
3. Press the
SHIFT
button.
SHIFT
4. Press the
ZOOM/IRIS
buttons to adjust the lens focus
while watching the monitor.
If the
IRIS CLOSE
and
IRIS OPEN
buttons are pressed
for approx. 1 sec. or more simultaneously, the iris is
reset to the default.
WIDE
TELE
IRIS
ZOOM
CLOSE
OPEN
IRIS RESET