Panasonic Workio DP-3510, Руководство по обслуживанию

Страница: 531 / 858

531
JAN 2006 Ver. 5.2
DP-3510/3520/3530/4510/4520/4530/6010/6020/6030
11.1.2.2.8. Detecting the Height of Output on the Tray
1. Outline
The number of sheets delivered to the tray and the number of sets (number of stapling operations) are
stored in memory by the Finisher Controller PCB. The height of the paper checked by the Height
Sensor (PS1). See Table. 2-004 for the maximum loading capacity of each tray.
The Finisher Controller PCB stops operation when the conditions in Table. 2-004 occur, informing the
Copier that the tray is full.
Notes:
1. The capacity for the non-staple sort mode is approximate and computed based on 21 lbs
(80g/m2) paper.
2. Alignment for stacks containing 750 sheets or more is not guaranteed.
3. Stacking height specification is ±7 mm.
Caution:
1. The term “small-size” stands for A4, A5-R, B5, LTR, and INV-R.
2. The term “large-size” Stands for A3, A4-R, B4, B5-R, LGL, LDR, LTR-R, and FLS.
Table. 2-004
Fig. 2-049
Tray
Stacking mode
Non-staple sort Staple sort
Small-size Large-size
Mixed
sizes
Small-size Large-size
Mixed
sizes
Tray 1
5.79 in
(147 mm)
high
(1000
sheets) 1.73 in
(44 mm)
high
(500
sheets) 1.73 in
(44 mm)
high
(300
sheets) 4.33 in
(110 mm)
high
(750 sheets
/ 30 sets) 2.91 in
(74 mm)
high
(500 sheets
/ 30 sets) 0.87 in
(22 mm)
high
(150 sheets
/30 sets)
Tray 2
5.79 in
(147 mm)
high
(1000
sheets) 2.91 in
(74 mm)
high
(500
sheets) 1.73 in
(44 mm)
high
(300
sheets) 4.33 in
(110 mm)
high
(750 sheets
/ 30 sets) 2.91 in
(74 mm)
high
(500 sheets
/ 30 sets) 0.87 in
(22 mm)
high
(150 sheets
/ 30 sets)
Height Sensor (PS1)
Paper