Panasonic Workio DP-3510, Руководство по обслуживанию

Страница: 372 / 858

372
JAN 2006 Ver. 5.2
DP-3510/3520/3530/4510/4520/4530/6010/6020/6030
8.27.2. Installation
CAUTION!
Turn the Power Switch on the Left Side and the Main Power Switch on the Back of the
machine to the OFF position, and then unplug the AC Power Cord before beginning
installation.
1. Selecting the Site
Make sure that there will be adequate space for the
work (i.e., removal of paper).
Make sure also that the Finisher will be placed on the
same floor surface as its host machine
(i.e., at the same height, slope).
2. Removing the Packaging Material
Note:
The Machine is protected during shipment with
Tapes and Spacers against vibration and shock.
When the site has been selected, move the
Machine to the appropriate site, and remove all
Packaging Materials as illustrated below. Although
the Finisher is equipped with Casters, it moves
only in a straight line.
(1) Take the Accessory Box out of the Package.
Caution:
Do not remove the 4 Styrofoam Pads attached to
the Finisher. The absence of these Pads can
cause deformation of the Rail Mount.
(2) Without removing the Pads, lift the Finisher, and
stand it on the floor.
(Be sure to work in a group of two.)
83.3 "
(2115 mm)
3.9"
(100mm)
3.9"
(100mm)
3.9"
(100mm)
3.9"
(100mm)
57.6 "
(1463 mm)
(1)