71
4
●
Group Sequence (G-SEQ)
This table is used to program or edit a Group Sequence.
A Group Sequence consists of up to 64 steps. In each step, a maximum of 16 cameras can be assigned to 16 monitors, each
with preset position (if applicable) and AUX 1 and AUX 2 control.
There are 8 Group Sequences available in this system.
To program or edit a Group Sequence, do the following:
Caution:
Before programming or editing a Group Sequence, the Alarm Mode must be in the Off mode first. Follow Alarm Mode
Select procedures on page 76.
1. Move the cursor to position 3 by moving the Joystick Controller. Enter the desired Group Sequence number (1-8) by
pressing the Numeric keys, and then press the
CAM (SET)
key to execute the selection.
2. Confirm that the desired step number is indicated.
If not, move the cursor to position 4 by moving the Joystick controller, then enter the desired step number (1-64) by press-
ing the Numeric keys.
3. Move the cursor to position 5 by moving the Joystick Controller.
Enter the desired Dwell Time (1-30) by pressing the Numeric keys.
4. Move the cursor to position 6 by moving the Joystick Controller.
Enter the desired camera number (1-128) by pressing the Numeric keys.
5. Move the cursor to position 7 by moving the Joystick Controller.
Enter the associated pan / tilt preset position number (if applicable) by pressing the Numeric keys.
6. Move the cursor to position 8 or 9 by moving the Joystick Controller.
Press the Function
F4
button to open the Pop Up Window.
Select AUX On or Off by moving the Joystick Controller, and then press the
CAM (SET)
key to execute the selection.
7. Press the Function
F1
button to select the next step.
Repeat the above procedures until the Group Sequence is completely assembled.
8. To select the previous step, press the Function
F2
button.
9. When satisfied with all of the above steps, press the
MON (ESC)
key to escape from the programming mode.
The cursor returns to position 3.
10. Repeat the above procedures to program the other Group Sequences.
S e t
U p
F 1 : N e x t
F 2 : P r e
F 3 : D E L
F 4 : P o p
P R O G .
G - S E Q
G r o u p
S e q u e n c e
1
M O N I
0 1
1 0
C A M
1 5
0 9
2 0
0 2
0 3
0 4
0 5
0 6
0 7
0 8
0 9
1 0
1 1
1 2
1 3
1 4
1 5
1 6
U p
0 2
2 0
P R E
A U X 1
. . O n
. . O f f
S t e p
S t e p
S t e p
0 1
0 2 s e c
D w e l l
A U X 2
q
w
e t
r
y
u
i
o
Содержание WJSX550C - MATRIX SWITCHER
