69
4
●
Program Sequence (P-SEQ)
This table is used to program or edit a Program Sequence.
A Program Sequence is a series of 64 steps assigned to a particular monitor.
Each step has a camera number assigned to it.
The Program Sequence number refers to the actual monitor that a sequence is assigned to.
In the table below, the sequence is assigned to monitor #1.
This table also has an Auto Skip function, which, when selected on, will automatically skip any step if there is no video signal
present at that step. The duration in time of each step is determined by the Dwell Time setting.
To program or edit a Program Sequence, do the following:
1. Move the cursor to position 3 by moving the Joystick controller.
Enter the desired sequence number (1-16) by pressing the Numeric keys, and then press the
CAM (SET)
key to execute
the selection.
2. Move the cursor to position 4 by moving the Joystick controller.
Press the Function
F4
button to open the Pop Up Window.
Select Auto Skip On or Off by moving the Joystick Controller, and then press the
CAM (SET)
key to execute the selection.
3. Move the cursor to position 5 by moving the Joystick Controller.
Enter the desired Dwell Time (1-30) by pressing the Numeric keys.
4. Move the cursor to position 6 by moving the Joystick Controller.
Enter the desired camera number (1-128) for each step by pressing the Numeric keys.
5. When satisfied with all of the above steps, press the
MON (ESC)
key to escape from the programming mode.
The cursor returns to position 3.
6. Repeat the above procedures to program the other monitor program sequences.
S e t
U p
F 1 : - -
F 2 : - -
F 3 : D E L
F 4 : P o p
P R O G .
P - S E Q
P r o g r a m
S e q u e n c e
M 0 1
A u t o
S k i p
S t e p
0 1
o f f
D w e l l
0 1
C A M
1 0
2 7
4 3
2 1
6 0
3 3
0 9
1 8
2 5
4 2
3 9
0 3
2 2
5 0
4 1
5 3
C A M
2 0
1 2
0 7
0 0
C A M
C A M
0 2
0 3
0 4
0 5
0 6
0 7
0 8
0 9
1 0
1 1
1 2
1 3
1 4
1 5
1 6
S t e p
1 7
1 8
1 9
2 0
2 1
2 2
2 3
2 4
2 5
2 6
2 7
2 8
2 9
3 0
3 1
3 2
S t e p
3 3
3 4
3 5
3 6
3 7
3 8
3 9
4 0
4 1
4 2
4 3
4 4
4 5
4 6
4 7
4 8
S t e p
4 9
5 0
5 1
5 2
5 3
5 4
5 5
5 6
5 7
5 8
5 9
6 0
6 1
6 2
6 3
6 4
U p
0 2 s e c
q
w
e
t
r
y
Содержание WJSX550C - MATRIX SWITCHER
