22
Installation and Setup
Gettin
g
Started
The procedure to start operations is sho
w
n
b
elo
w
.
Setup Procedure
1
Rack Mountin
g
Mount the recorder into the rack (page 23).
Go to step 2 if you are not using a rack.
2
Connections
Connect the recorder to the various devices (page 25).
3
Power On
Turn on the recorder (page 39).
W
hen using extension units, turn on all extension units
b
efore turning on
the recorder.
4
Installin
g
HDDs
Install the HDDs in the recorder (page 46).
Unformatted HDDs inserted into the recorder are automatically initialized.
Also, set the HDD operation mode as necessary (page 51).
5
Recorder Network Settin
g
s
Use the
b
uttons on the recorder
'
s front panel to do the net
w
ork settings
(refer to the Setup Instructions (PDF file)).
6
PC Network Settin
g
s
Change the PC
'
s net
w
ork settings to match the recorder
'
s settings (refer to
the Setup Instructions (PDF file)).
7
Initialize HDDs
To change HDD space management, display disk configuration and
initialize the HDD from the settings menu on the recorder as needed (refer
to the Setup Instructions (PDF file)).
8
Camera Network Settin
g
s
Open the PC settings menu from the PC and do the net
w
ork settings (refer
to the Setup Instructions (PDF file)).
9
Setup
Set up the functions that you need (refer to the Setup Instructions (PDF
file)).
10
Start Operations
W
hen necessary
Replace HDDs
You can change or format HDDs
w
hile the recorder is [On].
ND400_Basic.book 22 ページ ２００８年４月８日 火曜日 午後３時５９分
