• The Positioner Joystick (2) now controls the location of
the mosaic image.
• If the border is desired to highlight the "anonymous"
area, press the BORDER Button (25) on the WIPE
PATTERN block.
• If the Reverse function (REVERSE Button (28)) and/or
the Monochrome function (MONO Button (34)) is added,
more highlight effect can be produced.
5. Picture-in-Picture
• Reset the functions to the factory setup mode by
turning off and on the power of the unit.
• Press the Square Wipe Button (60).
• Press the COMPRESSION Button (71).
• Press the Positioner ON/OFF Button (3).
• Adjust the size of the square wipe picture by using the
Mix/Wipe Lever (99).
•
Press the SCENE GRABBER Button (4).
• The other wipe patterns can be selected by pressing
the Square Wipe Button (60) repeatedly .... circle, oval,
and diamond. Then adjust the Mix/Wipe Lever (99) to
obtain the smaller wiped size
Note:
Only square wipe pattern in the Picture-in-Picture
mode can be stored to the Event Memory.
3. After Image
• Reset the functions to the factory setup mode by
turning off and on the power of the unit.
• Select the same source input for both the A-bus and
B-bus.
• Press the STROBE Button (38).
• Press the MIX Button (73).
• Adjust the TIME Control (39) and Mix/Wipe Lever (99)
to obtain the necessary After Image.
• If required, press the A/V SYNCHRO Button (43) to
synchronize this effect to the audio.
4.
Multi/Live pictures mixing
• Reset the functions to the factory setup mode by
turning off and on the power of the unit.
• Select the same source input for both A-bus and B-bus.
• Press the MULTI Button (40).
• Press the COMPRESSION Button (71) and Square Wipe
Button (60).
• Adjust the Mix/Wipe Lever (99) to change the size of
square picture.
• Press the STROBE Button (38)
The live picture in
the center of the monitor screen and the multiple still
pictures on the back is obtained.
• •
If required, change the position of the live picture by
operating the Positioner Joystick (2).
H-5. Event Memory accessed by AG-A800
The Event Memory can be accessed by AG-A800 at the
points of DSK IN/OUT set by AG-A800
Note:
1. Do not execute the Wipe or Mix effects with
transition time under the Event Memory in AB-Roll
Editing.
2. This application can be applied for the NEGA,
MONO, MOSAIC, PAINT, TRAIL and MULTI on the
A-bus in DIGITAL EFFECT block, and also be
applied for on/off of the Color Correction. In this
case, the Assemble Editing should be usedinstead
of AB-Roll Editing.
[Example]
• Memorize the MOSAIC on A-bus into Event
Memory No. 1.
•
Select A-bus picture.
•
Stand by the editing system and select the Event
Memory No. 1.
• Execute the editing. At the point of IN of DSK Key,
the Event Memory No. 1 will be started.
Then at the point of OUT of DSK Key, the Event
Memory No. 1 will be finished.
- 3 7 -
Содержание WJMX50 - MIXER
Страница 30: ... 29 ...
