Panasonic WJMX50 - MIXER Скачать руководство пользователя страница 21 | Manualshive

Страница: 21 / 42

Panasonic WJMX50 - MIXER Скачать руководство пользователя страница 21

B-5. Position Control

The position of the specific wipe pattern can be
changed on the monitor screen using Position Control
function

C. Basic Operation-2

Digital Effect block

The  following  instructions  detail  the  Digital  Effect  block
function  which  generates  digital  special  effects  for  the
A-bus  and  B-bus  source  video  signals  In  order  to  add
the desired effect(s) on the A-bus (B-bus) signal, press the
A-Button (58) (B-Button (57)) and the ON-Button (59)

Notes:

1. The selected effect(s) can be added to either the A-bus

or B-bus at one time

2 Without pressing the ON Button (59), the digital

effect(s) will not applied on the A-bus or B-bus signal

• Press the Square Wipe Button (60) and select the

desired wipe pattern by pressing this button repeatedly

• If necessary, change the aspect ratio by using the

Aspect Control (29) and Aspect ON/OFF Button (30)

• Press the ON Button (3) (The wiped size becomes

double)

• Adjust the Mix/Wipe Lever (99) to obtain the desired

wipe size

• Operate the Positioner Joystick (2) The position of the

wiped scene can be changed on the monitor screen

1. Negative

Press the NEGA Button (31)  The negative image (like
a film negative) is obtained  The Colour Correction can
also be added  with  this  function

Normal Image

Negative Image

• When the SCENE GRABBER Button (4) is selected

together with the ON Button (3), the scene in the wipe

pattern will be "grabbed"

• Operate the Positioner Joystick (2) The position of the

"grabbed" wipe scene can be freely set on the monitor
screen

2. Press the MOSAIC Button (33)

A mosaic-like or

box-like pattern is obtained The size of the mosaic
pattern can be adjusted continuously for up to 31
increments by adjusting the SIZE Control (32)

Note:

When the ON Button (3) is turned off, the SCENE
GRABBER Button (4) becomes off

- 2 0 -

«
...
19
20
21
22
23
...
»

Содержание WJMX50 - MIXER











































Отзывы:

Нет отзывов