B-3. Audio Mixer
There are 7 audio source inputs on the WJ-MX50 -
the Source 1/2/3/4, 2 auxiliary audio inputs (AUX1, 2)
and the external microphone. Each audio level can be
adjusted independently by the audio faders.
The EFFECT Button (17) must be on to have the mixed
audio outputs as combined in Audio Mix.
• When the AUX2 audio (instead of external microphone)
is to be adjusted, turn the AUX-2/Mic Switch (105) on
the front panel to the AUX2 position
B-4. Colour Correction
This function allows for the adjustment of colour from
the selected input source, as well as compensation
for excessive colour Using the monochrome effect, a
single tint can be cast over on entire scene image
Notes:
1 The Colour Correction will have no effect if the
selected source video is a Black/White signal
2 The MONO Button (34) on the DIGITAL EFFECT
should be off
3 The same colour correction should be applied to
both the A bus and B-bus signals
• To correct the A-bus signal, press the A Button (7) once.
The LED starts blinking. In this case only the CHROMA
Control (8) performs a colour correction for the A bus
signal. If you press the A Button (/) a second time, the
LED is turned on The CHROMA Control (8) and the
R/G/B Control (5) are then available to make colour
correction for the A-bus signa.l To eliminate the colour
correction funtion, press the A Button (7) a third time to
turn off the LED
.
• To correct the B-bus signal, press the B Button (6)
once. The LED starts blinking In this case only the
CHROMA Control (8) performs colour correction for the
B bus signal If you press the B Button (6) a second
time, the LED is turned on The CHROMA Control (8)
and the R/G/B Control (5) are then available to make
colour correction tor the B bus signal. To eliminate the
colour correction, press the B Button (6) a third time to
turn off the LED
.
• If the CHROMA Control (8) is turned fully to the MIN
position and the position of the R/G/B Control (5) to
the centre, a Black and White video image is obtained.
When adjusting the R/G/B Control (5) from this position,
a mono tone (R/G/B) video image is obtained.
Note:
The Black and White video image is obtained in
another way - Press the Colour-A Button (7) or
Colour B (6) Button twice (The LED blinks) Turn
the CHROMA Control (8) to fully MIN position
.
• The A Fader (90) adjusts the audio level of the A-bus
Source Audio Signal, the B Fader (89) adjusts that of
the B bus The AUX1 Fader (88) or the MIC/AUX2
Pader (87) adjusts each respective audio input signal
accordingly
.
• The MASTER Fader (86) adjusts the output audio level
of the 4 mixed input faders. It is advisable to adjust
the average output audio level to about 0 dB as
represented on the Audio Level Indicator (9)
.
• When the A Button (15) on the PROGRAM OUT
is pressed, the A-bus/AUX1 /AUX2-MIC audios are
output to the Program Out Audio-1, -2 on the rear
panel
.
• When the B Button (16) on the PROGRAM OUT is
pressed, theB bus/AUX1/AUX2 MIC audios are output
to the Program Out Audio -1, -2 on the rear panel
.
• When the EFFECT Button (17) on the PROGRAM OUT
is pressed, A-bus/B bus/AUX1/AUX2 MIC audios are
output of the Program Out Audio -1 ,-2 on the rear panel
- 19-
Содержание WJMX50 - MIXER
Страница 30: ... 29 ...
