manualshive.com logo in svg

Panasonic WJMX50 - MIXER, Руководство по эксплуатации

Поделиться
Скачать
Panasonic WJMX50 - MIXER Скачать руководство пользователя страница 24

•  Operate the Mix/Wipe Lever (99) from A-bus to B-bus,

or vice versa to the desired display ratio.

•  The Mix/Wipe  LED's (100)  will  light  as appropriate.

(1)  A-bus:  ON—»A-bus  image  fully  displayed  on  the

screen

(2)  A-bus:  blinking—>A-bus  image  (stronger)  and

B-bus image (weaker) on the screen.

(3)  B-bus:  blinking—>A-bus  image  (weaker)  and

B-bus image (stronger) on the screen.

(4)  B-bus:  ON—»B-bus  image  fully  displayed  on  the

screen.

Note:

When the Mix/Wipe Lever (99) is positioned at the
centre, the brighter part of each respective scene
(between  the A-bus signal  and  B-bus signal) can
be observed on the screen (as opposed to the Mix
function which just mixes the two images).

D-3. Wipe

The wipe pattern is produced from the WIPE PATTERN
block as shown below.

Notes:

1.  The wipe pattern can be generated in combination

with  the  Wipe  Pattern  Select  Buttons  and  the
Modify  Buttons.  Every  generated  wipe  pattern
combination is numbered and  is displayed  on the
Wipe Pattern Number Indicator (24).  Refer to the

Pattern Table on page 28.

2.  Each generated wipe  pattern can be selected for

the  Wipe  Edge  function  and  the  Wipe  Direction
function by appropriately pressing  the Wipe  Edge
Buttons and the Wipe Direction Buttons.

2.  Wipe Edge

•  Press the BORDER Button (25) once, a narrow  border

is  added  between  the  wiped  images  .  If  it  is  pressed
again,  the  border  becomes wide.  A third  press of the
button eliminators the border entirely.

•  Press one of the Matte Colour Selectors (13) to select

then  add  the  desired  colour  on  the  border.  (The
complementary colour of  Matte Colour is applied.)

Narrow  Border
with  Matte  Color

Wide Border
with  Matte

  Color

1.  Wiping

•  Press the WIPE Button (74)
•  Select the source signals from the A-bus (102) and the

B-bus (101). In case the MATTE is selected, the colour
choice is available from the SELECT buttons (13) on the
MATTE  GENERATOR

•  Select  and  press  the  desired  Wipe  Pattern  Select

Buttons and the Modify Buttons.

•  Also  if  desired,  select  and  press the  buttons from the

Wipe Edge Buttons and the Wipe Direction Buttons.

•  Operate the  Mix/Wipe Lever (99) from A-bus to  B-bus,

or vice versa  Wiping is thus performed accordingly.

•  Notice  that  the  Mix/Wipe  LED's  (100)  are  lighting  as

follows.
(1)  A-bus:  ON—»A-bus  image  fully  displayed  on  the

screen.

(2)  A-bus :  blinking—>The Mix/Wipe Lever (99) moves

to halfway done.

(3)  B-bus :  blinking—>The Mix/Wipe Lever (99) moves

after halfway done.

(4)  B-bus:  ON—»B-bus  image  on  fully  displayed  the

screen.

•  Press the SOFT Button (26). A faint border is displayed

between the two video images at the wipe margin. (No
Matte  Colour  is available)

3. 

Wipe Direction

•  Press  the  ONE-WAY  Button  (27).  The  wiping  scene

moves  the  same way  every  time  the  Mix/Wipe  Lever
(99) is operated.

- 2 3 -

Содержание WJMX50 - MIXER











































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды