Panasonic WJ-HL208A Скачать руководство пользователя

Страница: 7 / 90

AVC patent portfolio license

This product is licensed under the AVC Patent Portfolio License for the personal and non-commercial use

of a consumer to (i) Encode video in compliance with the AVC Standard (“AVC video”) and/or (ii) Decode

AVC video that was encoded by a consumer engaged in a personal and non-commercial activity and/or was

obtained from a video provider licensed to provide AVC video. No license is granted or shall be implied for

any other use. Additional information may be obtained from MPEG LA, L.L.C.

See http://www.mpegla.com

GPL/LGPL

This product contains software licensed under GPL (GNU General Public License), LGPL (GNU Lesser

General Public License), etc.

Customers can duplicate, distribute and modify the source code of the software under license of GPL

and/or LGPL.

Read the “readme.txt” the provided CD-ROM for further information about the software.

Please note that Panasonic shall not respond to any inquiries regarding the source code.

Handle this product with care.

Do not strike or shake, as this may damage this product.

Do not strike or give a strong shock to this product.

It may cause damage or allow water to enter this product.

Precautions for installation

This product is designed for indoor use.

Avoid the following locations for installation.

Locations exposed to direct sunlight

Places subject to having strong vibration or impact

Near magnetic field sources such as a television or speakers

Place where condensation forms easily, where temperature changes greatly, humid places

Steamy and oily places such as kitchens

Places which are not level

Places subject to dust

Places subject to water splash or spray

Do not install this product in locations where the product or the cables can be destroyed or damaged

by persons with malicious intent.

Place this product horizontally on a level surface.

Do not place this product in an upright position. When stacking

multiple recorders, clear a space of more than 5 cm from both

sides, the top, the bottom and the rear of them.

More than 5 cm

Содержание WJ-HL208A



























































































Результаты поиска

Содержание WJ-HL208A

Отзывы:

Похожие инструкции для WJ-HL208A

Бренды по названию

Популярные бренды

Panasonic WJ-HL208A, Руководство по эксплуатации

Результаты поиска

Содержание WJ-HL208A

Отзывы:

Похожие инструкции для WJ-HL208A

Бренды по названию

Популярные бренды