69
Recording information about video images currently displayed on the screen displays on the recording status
bar. A grey vertical line indicates the current search position. To search specifi c video, move the vertical line
by using the Left or Right arrow buttons on the front panel or by clicking the mouse on the desired segment.
If the recorder’s time and date have been reset to a time that is earlier than some recorded video, it is
possible for the recorder to have more than one video stream in the same time range. In this case, the
overlapping time range in the record table will be separated by a yellow vertical line.
Note: The recorded data in the time range located after the yellow vertical line is the latest.
There are three view modes. “Standard view”, “Expanded view” and “Compact view”. Standard view (default)
displays combined recording information of all camera channels currently displayed on the screen. In the
Standard view mode, selecting the icon located at the bottom switches to the Expanded view mode. The
Expanded view displays the recording information of each camera channel currently displayed on the screen.
Selecting the icon in the Standard view mode switches to the Compact view mode which displays only the
toolbar. Selecting the“ icon in the Compact view mode switches to the Standard view mode, and selecting
the icon in the Expanded view mode switches to the Standard view mode.
Selecting “ ” or “ ” located at the bottom zooms the record table. Selecting “ ” displays eight hours
(12 hours with 1920x1080 resolution) (1-minute based), and selecting “ ” displays 24 hours (3-minute
based) at once. To move to earlier or later times that are not shown in the current record table screen, select
the arrows located at the end of the times by using the arrow buttons on the front panel.
Note: If the recorder has images recorded in more than one recording mode in the same time range,
the recording status bar displays recording information in the following priority order: Panic
Ú
Pre-Event
Ú
Event
Ú
Time. The color of the bar indicates different recording modes: Red for
Panic, Yellow for Pre-Event, Purple for Event, and Blue for Time.
Selecting “ ” located at the bottom displays the “Calendar Search” screen.
Days with recorded video display on the calendar with white numbers.
You can highlight the days with recorded video by using the arrow
buttons. Once you have highlighted a day, press the (Play/Pause)
button to select it. The fi rst recorded image of the selected date will pause
on the screen. Once you have selected the date you want to search,
review the surrounding video by using the playback controls located at the
bottom of the Record Table Search screen.
Figure 85: Calendar Search screen
Selecting “ ” located at the bottom displays the Search menu.
p
p
Go To:
Displays the fi rst or last recorded image, or searches by date and time (see the
previous “Searching Video – Go To” section of this chapter for more details).
p
p
Clip-Copy:
Clips a video segment and saves it (see the following “Clip-Copy” section for
more details).
p
p
EL-Zoom:
Zooms the current playback image.
p
p
Slow Play:
Plays video at low speed (x1/2, x1/3, x1/4, x1/6 and x1/8).
Figure 86: Search menu
The individual playback controls at the bottom perform the following functions as described below:
Go to the previous image
Play/Pause
Go to the next image
Fast backward play
Fast forward play
Selecting “ ” located at the bottom displays the Bookmarks screen. See the following “Bookmarks” section
for details.
Selecting “ ” in the top-left corner exits the Record Table Search screen.
