manualshive.com logo in svg

Panasonic WJ-HL208A, Руководство по эксплуатации

Поделиться
Скачать
Panasonic WJ-HL208A Скачать руководство пользователя страница 62

62

Figure 77: Event Status – Storage screen

The “Type” column displays the type of storage device.
The “Disk Bad” column displays the percentage of bad sectors. “Not formatted” indicates the device is not 

formatted.
The “Temperature” column displays the temperature of the storage device.
The “S.M.A.R.T.” column displays “Good”, “Bad” or “N/A”, depending on storage conditions.

p

p

Good:

 The storage condition is normal.

p

p

Bad:

 Data cannot be written on or read from the storage device.

p

p

N/A:

 Storage conditions are normal, however, the S.M.A.R.T. monitoring is not working or supported.

Note:  When the storage condition is “Bad”, the Event Status – Storage screen displays and you can 

check the storage condition for details. Once the “Bad” message displays, replacing the hard 

disk drive is recommended, usually within 24 hours.

  “Temperature” and “S.M.A.R.T.” information will be available only for internal hard disk drives 

supporting the SMART (Self-Monitoring Analysis and Reporting Technology) monitoring program.

Recording Video

Once you have installed the recorder following the instructions in “Chapter 2 — Installation”, it is ready to 

record. The recorder will start recording based on the settings you made in the “Record” setup screen. See 

“Chapter 3 — Configuration”.
“Overwrite On” or “Overwrite Off”. The factory default is “Overwrite On”. It does this by recording over the oldest 

video once the hard disk is full. Setting the recorder to “Overwrite Off” causes it to stop recording once the hard 

disk is full.
Although you will be able to record without changing the unit from its original factory settings, you will want to 

take advantages of the recorder’s many tools. See “Chapter 3 — Configuration” for detailed descriptions of 

the recording mode options.

Panic Recording

Selecting “ ” (Panic) in the Live Monitoring menu or pressing the [PANIC] button starts panic recording 

of all cameras, and selecting “ ” or pressing the button again stops panic recording. If you set the Panic 

Recording Duration in the Panic Record setup screen, panic recording will stop automatically according to the 

preset duration as long as “ ” is not selected or the [PANIC] button is not pressed.

Note:  When the recorder is not in the Overwrite mode and all available storage space has been used, 

panic recording will not operate.

Содержание WJ-HL208A



























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды