Panasonic WJ-CU550A, Руководство по эксплуатации

Страница: 85 / 138

-81-
15. Timer Alarm Schedule
This table can be set up only after the alarm mode is set up to the Off mode in the Alarm Mode Select table.
This table is used to enable and disable the Alarm Modes according to the time of day and day of the week.
S e t U p
0 0 : 0 0
F 1 : - - F 2 : - - F 3 : D E L F 4 : P o p U p
P R O G . A l a r m T i m e r S U N .
T i m e r A l a r m S c h e d u l e
A l a r m M o d e
O f f
M o d e 1
M o d e 2
O f f
M o d e 3
0 9 : 0 0
1 7 : 0 0
1 8 : 0 0
1 9 : 0 0
0 9 : 0 0
1 7 : 0 0
1 8 : 0 0
1 9 : 0 0
2 4 : 0 0
S t a r t S t o p
To programme or edit a Timer Alarm Schedule do the following:
1. Move the cursor to the desired item (Day or Special Day) by moving the Joystick Controller.
2. Press the Set
(SET) Key to execute the selection. The selected item appears on the monitor.
3. Move the cursor to the 5 position by moving Joystick Controller, then press the Set (SET) Key.
4. Move the cursor to the 6 position by moving the Joystick Controller.
Press the Function (F4) Key to open the Pop Up Window.
Select the desired alarm mode by moving the Joystick Controller, then press the Set (SET) Key execute the selection.
5. Move the cursor to the 7, 8, 9 or 10 position by moving the Joystick Controller.
Enter the desired hours (military time) or minutes by pressing the Numeric Keys.
6. When satisfied with all alarms, press the Escape (ESC) Key to escape from the programming mode. Programmed alarms are
displayed in chronological order and the cursor returns to the 5 position.
7. Similarly , repeat the above procedures to programme other days and special days.
Note:
When programming an alarm that extends into the next day, divides the alarm into two separate alarms and programme
both alarms separately.
Caution: The alarm table, that is programmed on the special days 1 - 5, will be activated at the date programmed on the
Special Days Schedule.
Refer to the Special Days Schedule on page 74.
5