Panasonic WJ-CU550A, Руководство по эксплуатации

Страница: 107 / 138

SEQ ALT
FORWARD
-103-
8. Press the Decrement (DEC - 1CAM) Switch to move a
sequence one step backward from the step that was
previously stopped by the Stop
(STOP) Switch.
P-Seq Stop
Monitor 16
DEC
-1CAM
9. Press the Forward Sequence (FORWARD SEQ)
Switch, after pressing the Alternate (ALT) Switch, to
start the Program Sequence from the beginning of the
sequence pattern that was previously stopped by the
Stop
(STOP) Switch.
10. To cancel the Program Sequence select a camera.
Refer to the Camera Selection on page 98.
7-2 Tour Sequence
The following functions are available only if a Tour
Sequence has been previously established through the Set
Up Menu. As described on page 70, any one of 32 tours
can be assign to any one of 16 monitors.
1. Select the desired monitor.
Refer to the Monitor Selection on page98.
2. Select the desired Tour Sequence number by press-
ing the Numeric Keys.
Camera 01 1
Monitor 16
Camera 01
Monitor 16
2 3
4 5 6
7 8 9
MON CAM
ESC SET
0
1
A1
3. Press the Forward Sequence (Forward SEQ) Switch
to run the Tour Sequence.
FORWARD
SEQ
T-Seq 01
Monitor 16
4. Press the Stop (STOP) Switch to stop the Tour
Sequence.
T-Seq 01 Stop
Monitor 16
STOP
5. Press the Forward Sequence (FORWARD SEQ)
Switch to continue a sequence that was previously
stopped by the Stop
(STOP) Switch. The sequence
will continue in the forward direction from the step that
was selected at the time the Stop Switch was pressed.
T-Seq 01
Monitor 16
FORWARD
SEQ
6