Panasonic WJ-CU550A, Руководство по эксплуатации

Страница: 78 / 138

-74-
9. Special Day Schedule
Before programming this table, confirm that the Timer Event Schedule (Special Day 1-5) is programmed completely.
This table allows for up to 48 days to be defined as special days. In the Timer Event Schedule there are 5 tables where the special
days 1 through 5 are programmed for sequences. In this table, 48 specific, user defined, days of the year are assigned to one of
those 5 special days.
S e t U p
S p e c i a l
F 1 : - - F 2 : - - F 3 : D E L F 4 : P o p
D a y S c h e d u l e
P R O G . T i m e r S P E .
S P E Y
S 1 M A Y . 5 9 6
S 5 J U N . 9 9 6
S 2 O C T . 1 0 9 6
S 3 J A N . 1 9 6
S P E D M Y
S 4 A U G . 9 9 6
S 4 A U G . 9 6
S 4 A U G . 1 1 9 6
S 4 A U G . 9 6
S P E D M Y
1 0
1 2
S 4 A U G . 1 3 9 6
S 4 A U G . 1 4 9 6
S 4 A U G . 1 5 9 6
S 4 A U G . 1 6 9 6
S 4 A U G . 1 7 9 6
U p
D M
To programme or edit a Special Day Schedule do the following:
1. Move the cursor to the 4 position by moving the Joystick Controller, then press the Set (SET) Key.
2. Move the cursor to the 5 position by moving the Joystick Controller.
Press the Function (F4) Key to open the Pop Up Window. Select the desired special day, S1 - S5 by moving the Joystick
Controller and then pressing the Set
(SET)
Key to execute the selection.
3. Move the cursor to the 6 position by moving the Joystick Controller.
Enter the desired day by pressing the Numeric Keys.
4. Move the cursor to the 7 position by moving the Joystick Controller.
Press the Function (F4) Key to open the Pop Up Window. Select the desired month by moving the Joystick Controller and then
pressing the Set (SET) Key to execute the selection.
5. Move the cursor to the 8 position by moving the Joystick Controller.
Enter the last two numbers of the desired year by pressing the Numeric Keys.
Note: Valid dates are between the year 1996 and the year 2093. Enter “00” for the year of 2000.
6. When schedules are completely programmed, press the Escape (ESC) Key to escape the programming mode. The cursor
returns to the 4 position.
Note: When programming the above table be sure that month, day and year are all entered. Otherwise, if an item is not
entered, the schedule will be activated as shown below.
q w
e
r
t y u i
SPE D M Y Activate
S1 24 Dec.
−
24th Dec. of every year
S2
− −
96 Everyday of 1996
Also, if there is an overlap of dates in the schedule, like the one shown here, the upper left most item is given prece-
dence. In this example S1 is activated.
5