Panasonic WJ-CU550A, Руководство по эксплуатации

Страница: 106 / 138

-102-
7. Running a Sequence
7-1 Program Sequence
The following functions are available only if a Program
Sequence has been previously established for a particular
monitor through the Set Up Menu. As described on page
69, the Program Sequence can display up to 128 cameras
in a predetermined series on a selected monitor.
1. Select the desired monitor.
Refer to the Monitor Selection on page 98.
2. Press the Numeric Key 0.
1 2 3
4 5 6
7 8 9
MON CAM
ESC SET
0
Camera 01 0
Monitor 16
Camera 01
Monitor 16
A1
3. Press the Forward Sequence (FORWARD SEQ)
Switch to run the Program Sequence.
FORWARD
SEQ
P-Seq
Monitor 16
4. Press the Stop (STOP) Switch to stop the Program
Sequence.
P-Seq Stop
Monitor 16
STOP
5. Press the Forward Sequence (FORWARD SEQ)
Switch to continue a sequence that was previously
stopped by the Stop
(STOP) Switch. The sequence
will continue in the forward direction from the step that
was selected at the time the Stop Switch was pressed.
P-Seq
Monitor 16
FORWARD
SEQ
6. Press the Backward Sequence (BACK SEQ) Switch to
continue a sequence that was previously stopped by
the Stop
(STOP) Switch. The sequence will continue in
the reverse direction from the step that was selected
at the time the Stop Switch was pressed.
P-Seq
Monitor 16
BACK
SEQ
7. Press the Increment (INC + 1CAM) Switch to move a
sequence one step forward from the step that was
previously stopped by the Stop
(STOP) Switch.
P-Seq Stop
Monitor 16
INC
+1CAM
6