10
1. Remove the 3 screws fastened to the cabinet front plate. (Fig. 6-1)
2. Insert 4 claws of the discharge grille (right side)
4
and fasten the 3 screws. (Fig. 6-2)
CAUTION
Make sure to install the discharge grille to the outdoor unit before
powering ON to protect againts a rotating fan.
PIPE INSULATION
5
INSTALL THE DISCHARGE GRILLE
6
1. Please carry out insulation at pipe connection portion as mentioned in Indoor/Outdoor Unit Installation Diagram. Please wrap the
insulated piping end to prevent water from going inside the piping.
Fig. 6-1
Fig. 6-2
Remove the
3 screws
Fasten the
3 screws
Insert 4 claws
WARNING
This equipment must be
properly earthed.
Terminals on the indoor unit
1
2
3
Colour of wires
Terminals on the outdoor unit
1
2
3
Terminal screw
Tightening torque
cN•m {k
g
f•cm}
M4
157 ~ 196 {16 ~ 20}
M5
196 ~ 245 {20 ~ 25}
1
2
3
Earth Wire
must be longer
than other
wires for safety
reason.
Screw
Cable gland
5 mm or more
(gap between wires)
Indoor/outdoor
connecting
terminal board
WIRE STRIPPING AND CONNECTING REQUIREMENT
Wire stripping and crimp a ring
terminal to the wire
Inner diameter: Ø5.2 or more
Outer diameter: Ø12.5 or less
Fig. 4 - 5
CAUTION
If cleaning of the outdoor unit is necessary during installation or servicing,
do not clean the outdoor unit with any hydrocarbon based solvent.
