Identifying Controls
Quick Start Guide
12 13 14
9
10
1
2
3
4
5
6
7
8
11
10
TV
Using the On Screen Displays
- Operation guide
Many features available on this TV can be accessed via the On Screen Display menu.
Operation guide
Operation guide will help you to operate by
using the remote control.
Example : [Owner ID]
0
9
*
* * *
Please enter new PIN
PIN
Owner ID
EXIT
PIN entry
Operation guide
How to use remote control
MENU
Open the main menu
Move the cursor / select the menu item /
select from a range of options
Move the cursor / adjust levels / select from a
range of options
Access the menu / store settings after
adjustments have been made or options have
been set
BACK/
RETURN
Return to the
previous menu
EXIT
Exit the menu
system and return to
the normal viewing
screen
Auto power standby function
The TV will automatically go to Standby mode in the following conditions :
• no signal is received and no operation is performed for 30 minutes in Analogue TV mode
• [Off Timer] is active in the Timer Menu (p. 20)
• no operation is performed for the period selected in [Auto Standby] (p. 39)
•
This function does not affect the recording of Timer Programming and Direct TV Recording.
1 CI slot (p. 57)
2 Function select
•
[Volume] / [Contrast] / [Brightness] / [Colour] /
[Sharpness] / [Tint] (NTSC signal) / [Bass]
∗
/
[Treble]
∗
/ [Balance] / [Auto Setup]
(p. 46)
∗
[Music] or [Speech] mode in the Sound Menu
3
Channel Up / Down, Value change (when
using the F button), Switching the TV On
(press either button for about 1 second when
in Standby mode)
4 Changes the input mode
5 USB 1 / 2 port (p. 87)
6 SD Card slot (p. 59)
7 HDMI3 terminal (p. 87)
8 Headphones jack (p. 87)
9 AV2 terminals (p. 87)
10 Mains power On / Off switch
•
Use to switch the mains power.
If you turned the TV Off during Standby
mode by the remote control last time, the TV
will be in Standby mode when you turn the
TV On with Mains power On / Off switch.
11 Infrared transmitter for 3D Eyewear
•
Do not place any objects between the
transmitter and 3D Eyewear.
12 Remote control signal receiver
•
Do not place any objects between the TV remote
control signal receiver and remote control.
13 C.A.T.S. (Contrast Automatic Tracking
System) sensor
•
Senses brightness to adjust picture quality
when [C.A.T.S.] in the Picture Menu is set to
[On]
(p. 36)
14 Power and Timer LED
•
Red :
Standby
Green :
On
Orange :
Timer Programming On
Orange (flash) :
Recording of Timer Programming or
Direct TV Recording in progress
Red with orange flash :
Standby with Timer Programming On
or Direct TV Recording
•
The LED blinks when the TV receives a
command from the remote control.