Panasonic Varicam 35, Руководство по эксплуатации

Страница: 93 / 174

– 93 –
Chapter 9 Other Useful Functions — Handling setting data
Handling setting data
Each setting data can be saved to and read from an SD memory card.
File types
r
Setup file
All menu data
f
Target setting
All [MENU] (except the following)
[SYSTEM SETTINGS] [CARDS/MEDIA] [CPS PASSWORD]
[CLOCK] [CLOCK SETTING]
[TIME ZONE]
[REC SETTINGS] [TC] [SET TC]
[SET UB]
[TC/UB/Dur.]
[OUTPUT SETTINGS] [VF FOCUS ASSIST] [EXPAND SW]
f
File extension
.p2s
r
Lens file
Individual lens correction data
f
Number of files that can be saved in the camera
64
f
File extension
.ins
r
3D LUT file
3D LUT data for in-camera grading
f
File extension
.vlt
r
CDL file
CDL data for in-camera grading
f
File extension
.cdl
r
Metafile
Metadata for setting [REC META DATA] (only reading from the SD memory card)
f
File extension
.p2
Handling SD memory cards
The SD memory card can be removed and inserted, either before or after the power is turned on.
Inserting SD memory cards
Fig. 1 Fig. 2
1
Open the slot cover. (Fig. 1)
2
Insert the SD memory card into the SD memory card slot with the label side of the card upward, and close the slot cover. (Fig. 2)
@ @
NOTE
t
The SD memory card must be inserted with the correct side facing the SD card slot. If the SD memory card is hard to insert, it may be reversed or
upside-down. Do not force it into the slot. Check the orientation of the card before reinserting it.
t
Cautions when using SD memory cards
-
On the camera, use SD memory cards that conform to the SD standard, SDHC standard, or the SDXC standard.